Document Number-Date-Title-Status
IEC 14776-414 2009.06.01 Information technology – Small computer system interface (SCSI) – Part 414: Architecture model-4 (SAM-4) - Edition 1.0 Active
IEC 60034-15 2009.03.01 Rotating electrical machines – Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines - Edition 3.0 Active
IEC 60034-22 2009.10.01 Rotating electrical machines – Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets - Edition 2.0 Active
IEC 60038 2009.06.01 IEC standard voltages - Edition 7.0 Active
IEC 60050-617 2009.03.01 International Electrotechnical Vocabulary – Part 617: Organization/Market of electricity - Edition 1.0 Active
IEC 60059 2009.08.01 IEC standard current ratings - Edition 2.1; Consolidated Reprint Active
IEC 60061-1 SNAPSHOT 2009.08.01 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 1: Lamp caps - Edition 1.0; Database Snapshot Active
IEC 60061-2 SNAPSHOT 2009.08.01 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 2: Lampholders - Edition 1.0; Database Snapshot Active
IEC 60061-3 SNAPSHOT 2009.08.01 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 3: Gauges - Edition 1.0; Database Snapshot Active
IEC 60061-4 SNAPSHOT 2009.08.01 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 4: Guidelines and general information - Edition 1.0; Database Snapshot Active
IEC 60061 SNAPSHOT 2009.08.01 Lamp caps and holders together with gauges for the control of interchangeability and safety - Edition 1.0; Database Snapshot Active
IEC 60064 AMD 5 2009.07.01 AMENDMENT 5 Tungsten filament lamps for domestic and similar general lighting purposes – Performance requirements - Edition 6.0 Active
IEC 60068-2-14 2009.01.01 Environmental testing – Part 2-14: Tests – Test N: Change of temperature - Edition 6.0 Active
IEC 60068-2-38 2009.01.01 Environmental testing – Part 2-38: Tests – Test Z/AD: Composite temperature/humidity cyclic test - Edition 2.0 Active
IEC 60079-10-2 2009.04.01 Explosive atmospheres – Part 10-2: Classification of areas – Combustible dust atmospheres - Edition 1.0 Active
IEC 60079-18 CORR 1 2009.06.01 CORRIGENDUM 1 Explosive atmospheres – Part 18: Equipment protection by encapsulation “m” - Edition 3.0 Active
IEC 60079-18 2009.05.01 Explosive atmospheres – Part 18: Equipment protection by encapsulation “m” - Edition 3.0 Active
IEC 60079-26 CORR 1 2009.03.01 CORRIGENDUM 1 Explosive atmospheres – Part 26:Equipment with equipment protection level (EPL) Ga - Edition 2.0 Active
IEC 60079-29-1 INT 1 2009.07.01 IEC 60079-29-1 Edition 1.0 2007-08 Explosive atmospheres – Part 29-1: Gas detectors – Performance requirements of detectors for flammable gases - Edition 1.0 Active
IEC 60079-29-4 2009.11.01 Explosive atmospheres – Part 29-4: Gas detectors – Performance requirements of open path detectors for flammable gases - Edition 1.0 Active
IEC 60079-31 CORR 1 2009.03.01 CORRIGENDUM 1 Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure “t” - Edition 1.0 Active
IEC 60092-306 2009.11.01 Electrical installations in ships – Part 306: Equipment – Luminaires and lighting accessories - Edition 4.0 Active
IEC 60095-2 2009.10.01 Lead-acid starter batteries – Part 2: Dimensions of batteries and dimensions and marking of terminals - Edition 4.0 Active
IEC 60099-4 2009.05.01 Surge arresters – Part 4: Metal-oxide surge arresters without gaps for a.c. systems - Edition 2.2; Consolidated Reprint Active
IEC 60112 2009.10.01 "French, English" Method for the determination of the proof and the comparative tracking indices of solid insulating materials - Edition 4.1; Consolidated Reprint Active
IEC 60115-8 2009.01.01 Fixed resistors for use in electronic equipment – Part 8: Sectional specification – Fixed surface mount resistors - Edition 2.0 Active
IEC 60146-1-1 2009.06.01 Semiconductor converters – General requirements and line commutated converters – Part 1-1: Specification of basic requirements - Edition 4.0 Active
IEC 60191-6 2009.11.01 Mechanical standardization of semiconductor devices – Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Edition 3.0 Active
IEC 60196 2009.06.01 IEC standard frequencies - Edition 2.0 Active
IEC 60204-1 2009.02.01 Safety of machinery – Electrical equipment of machines – Part 1: General requirements - Edition 5.1; Consolidated Reprint Active
IEC 60205 2009.08.01 "French, English" Calculation of the effective parameters of magnetic piece parts - Edition 3.1; Consolidated Reprint Active
IEC 60255-1 2009.08.01 Measuring relays and protection equipment – Part 1: Common requirements - Edition 1.0 Active
IEC 60255-151 2009.08.01 Measuring relays and protection equipement – Part 151: Functional requirements for over/under current protection - Edition 1.0 Active
IEC 60264-1 AMD 1 2009.04.01 AMENDMENT 1 Packaging of winding wires – Part 1:Containers for round winding wires - Edition 1.0 Active
IEC 60264-3-1 2009.08.01 Packaging of winding wires – Part 3-1: Taper barrelled delivery spools – Basic dimensions - Edition 2.1; Consolidated Reprint Active
IEC 60264-4-1 2009.06.01 Packaging of winding wires – Part 4-1: Methods of test – Delivery spools made from thermoplastic materials - Edition 2.1; Consolidated Reprint Active
IEC 60264-5-1 2009.08.01 Packaging of winding wires – Part 5-1: Cylindrical barrelled delivery spools with conical flanges – Basic dimensions - Edition 1.1; Consolidated Reprint Active
IEC 60269-1 2009.07.01 Low-voltage fuses – Part 1: General requirements - Edition 4.1; Consolidated Reprint Active
IEC 60269-4 2009.05.01 Low-voltage fuses – Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices - Edition 5.0 Active
IEC 60282-1 2009.10.01 High-voltage fuses – Part 1: Current-limiting fuses - Edition 7.0 Active
IEC 60286-3-1 2009.05.01 Packaging of components for automatic handling – Part 3-1: Packaging of surface mount components on continuous tapes – Type V – Pressed carrier tapes - Edition 1.0 Active
IEC 60286-3-2 2009.05.01 Packaging of components for automatic handling – Part 3-2: Packaging of surface mount components on continuous tapes – Type VI – Blister carrier tapes of 4 mm width - Edition 1.0 Active
IEC 60286-5 2009.05.01 Packaging of components for automatic handling – Part 5: Matrix trays - Edition 2.1; Consolidated Reprint Active
IEC 60300-3-11 2009.06.01 Dependability management – Part 3-11: Application guide – Reliability centred maintenance - Edition 2.0 Active
IEC 60300-3-15 2009.06.01 Dependability management – Part 3-15: Application guide – Engineering of system dependability - Edition 1.0 Active
IEC 60311 2009.10.01 Electric irons for household or similar use – Methods for measuring performance - Edition 4.2; Consolidated Reprint Active
IEC 60317-16 AMD 2 2009.01.01 "AMENDMENT 2 Specifications for particular types of winding wires – Part 16: Polyester enamelled rectangular copper wire, class 155 - Edition 2.0" Active
IEC 60318-1 2009.08.01 Electroacoustics – Simulators of human head and ear – Part 1: Ear simulator for the measurement of supra-aural and circumaural earphones - Edition 2.0 Active
IEC 60320-2-4 AMD 1 2009.10.01 AMENDMENT 1 Appliance couplers for household and similar general purposes – Part 2-4: Couplers dependent on appliance weight for engagement - Edition 1.0 Active
IEC 60331-1 2009.05.01 "Tests for electric cables under fire conditions – Circuit integrity – Part 1: Test method for fire with shock at a temperature of at least 830 degrees C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm - Edition 1.0" Active
IEC 60331-2 2009.05.01 "Tests for electric cables under fire conditions – Circuit integrity – Part 2: Test method for fire with shock at a temperature of at least 830 Degrees C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm - Edition 1.0" Active
IEC 60331-3 2009.05.01 "Tests for electric cables under fire conditions – Circuit integrity – Part 3: Test method for fire with shock at a temperature of at least 830 Degrees C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure - Edition 1.0" Active
IEC 60331-11 2009.07.01 Tests for electric cables under fire conditions – Circuit integrity – Part 11: Apparatus – Fire alone at a flame temperature of at least 750 degree C - Edition 1.1; Consolidated Reprint Active
IEC 60332-3-10 2009.02.01 Tests on electric and optical fibre cables under fire conditions – Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables – Apparatus - Edition 1.1; Consolidated Reprint Active
IEC 60332-3-22 2009.02.01 Tests on electric and optical fibre cables under fire conditions – Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category A - Edition 1.1; Consolidated Reprint Active
IEC 60332-3-23 2009.02.01 Tests on electric and optical fibre cables under fire conditions – Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category B - Edition 1.1; Consolidated Reprint Active
IEC 60332-3-24 2009.02.01 Tests on electric and optical fibre cables under fire conditions – Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category C - Edition 1.1; Consolidated Reprint Active
IEC 60332-3-25 2009.02.01 Tests on electric and optical fibre cables under fire conditions – Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category D - Edition 1.1; Consolidated Reprint Active
IEC 60335-2-6 AMD 2 CORR 1 2009.02.01 "CORRIGENDUM 1 Household and similar electrical appliances – Safety – Part 2–6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances - Edition 5.0" Active
IEC 60335-2-17 2009.10.01 "Household and similar electrical appliances – Safety – Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances - Edition 2.2; Consolidated Reprint" Active
IEC 60335-2-21 2009.04.01 Household and similar electrical appliances – Safety – Part 2-21: Particular requirements for storage water heaters - Edition 5.2; Consolidated Reprint Active
IEC 60335-2-24 CORR 1 2009.06.01 "French, English" "CORRIGENDUM 1 Household and similar electrical appliances – Safety – Part 2–24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers - Edition 6.0" Active
IEC 60335-2-30 2009.11.01 Household and similar electrical appliances – Safety – Part 2-30: Particular requirements for room heaters - Edition 5.0 Active
IEC 60335-2-31 2009.01.01 Household and similar electrical appliances – Safety – Part 2-31: Particular requirements for range hoods and other cooking fume extractors - Edition 4.2; Consolidated Reprint Active
IEC 60335-2-34 2009.01.01 Household and similar electrical appliances – Safety – Part 2-34: Particular requirements for motor-compressors - Edition 4.2; Consolidated Reprint Active
IEC 60335-2-42 2009.08.01 "Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens - Edition 5.1; Consolidated Reprint" Active
IEC 60335-2-44 2009.04.01 Household and similar electrical appliances – Safety – Part 2-44: Particular requirements for ironers - Edition 3.1; Consolidated Reprint Active
IEC 60335-2-59 2009.11.01 Household and similar electrical appliances – Safety – Part 2-59: Particular requirements for insect killers - Edition 3.2; Consolidated Reprint Active
IEC 60335-2-61 2009.04.01 Household and similar electrical appliances – Safety – Part 2-61: Particular requirements for thermal storage room heaters - Edition 2.2; Consolidated Reprint Active
IEC 60335-2-66 2009.04.01 Household and similar electrical appliances – Safety – Part 2-66: Particular requirements for water-bed heaters - Edition 2.1; Consolidated Reprint Active
IEC 60335-2-73 2009.11.01 Household and similar electrical appliances – Safety – Part 2-73: Particular requirements for fixed immersion heaters - Edition 2.2; Consolidated Reprint Active
IEC 60335-2-74 2009.11.01 Household and similar electrical appliances – Safety – Part 2-74: Particular requirements for portable immersion heaters - Edition 2.2; Consolidated Reprint Active
IEC 60335-2-75 2009.04.01 Household and similar electrical appliances – Safety – Part 2-75: Particular requirements for commercial dispensing appliances and vending machines - Edition 2.2; Consolidated Reprint Active
IEC 60335-2-96 2009.01.01 Household and similar electrical appliances – Safety – Part 2-96: Particular requirements for flexible sheet heating elements for room heating - Edition 1.2; Consolidated Reprint Active
IEC 60335-2-97 2009.01.01 "Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment - Edition 2.2; Consolidated Reprint" Active
IEC 60335-2-102 2009.01.01 "Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections - Edition 1.1; Consolidated Reprint" Active
IEC 60350 2009.04.01 "French, English" "Electric cooking ranges, hobs, ovens and grills for household use – Methods for measuring performance - Edition 2.2; Consolidated Reprint" Active
IEC 60364-1 CORR 1 2009.08.01 "Low-voltage electrical installations – Part 1: Fundamental principles, assessment of general characteristics, definitions - Edition 5.0" Active
IEC 60364-5-52 2009.10.01 Low-voltage electrical installations – Part 5-52: Selection and erection of electrical equipment – Wiring systems - Edition 3.0 Active
IEC 60364-5-56 2009.07.01 Low-voltage electrical installations – Part 5-56: Selection and erection of electrical equipment – Safety services - Edition 2.0 Active
IEC 60364-7-717 2009.07.01 Low-voltage electrical installations – Part 7-717: Requirements for special installations or locations – Mobile or transportable units - Edition 2.0 Active
IEC 60384-13-1 CORR 1 2009.03.01 CORRIGENDUM 1 Fixed capacitors for use in electronic equipment – Part 13-1: Blank detail specification – Fixed polypropylene film dielectric metal foil d.c. capacitors – Assessment level E - Edition 2.0 Active
IEC 60401-2 2009.09.01 Terms and nomenclature for cores made of magnetically soft ferrites – Part 2: Reference of dimensions - Edition 2.0 Active
IEC 60404-3 AMD 2 2009.11.01 AMENDMENT 2 Magnetic materials – Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester - Edition 2.0 Active
IEC 60404-6 CORR 1 2009.02.01 CORRIGENDUM 1 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens - Edition 2.0 Active
IEC 60404-8-10 2009.05.01 Magnetic materials – Part 8-10: Specifications for individual materials – Magnetic materials (iron and steel) for use in relays - Edition 2.0 Active
IEC 60417 DB SNAPSHOT 2009.02.01 Graphical symbols for use on equipment - DATABASE SNAPSHOTS: 02/06/2009 Active
IEC 60424-5 2009.02.01 Ferrite cores – Guide on the limits of surface irregularities – Part 5: Planar-cores - Edition 1.0 Active
IEC 60436 2009.11.01 Electric dishwashers for household use – Methods for measuring the performance - Edition 3.1; Consolidated Reprint Active
IEC 60502-1 2009.11.01 "Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) - Edition 2.1; Consolidated Reprint" Active
IEC 60529 CORR 3 2009.10.01 Degrees of Protection Provided by Enclosures (IP Code) - Edition 2.1 Active
IEC 60534-2-4 2009.05.01 Industrial-process control valves – Part 2-4: Flow capacity – Inherent flow characteristics and rangeability - Edition 2.0 Active
IEC 60598-2-14 2009.02.01 Luminaires – Part 2-14: Particular requirements – Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment - Edition 1.0 Active
IEC 60601-1 INT 2 2009.01.01 "French, English" MEDICAL ELECTRICAL EQUIPMENT – Part 1: General requirements for basic safety and essential performance - Edition 3.0 Active
IEC 60601-2-1 2009.10.01 Medical electrical equipment – Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV - Edition 3.0 Active
IEC 60601-2-2 2009.02.01 Medical electrical equipment – Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories - Edition 5.0 Active
IEC 60601-2-5 2009.07.01 Medical electrical equipment – Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment - Edition 3.0 Active
IEC 60601-2-13 2009.08.01 Medical electrical equipment – Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems - Edition 3.1; Consolidated Reprint Active
IEC 60601-2-18 2009.08.01 Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment - Edition 3.0 Active
IEC 60601-2-19 2009.02.01 Medical electrical equipment – Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators - Edition 2.0 Active
IEC 60601-2-20 2009.02.01 Medical electrical equipment – Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators - Edition 2.0 Active
IEC 60601-2-21 2009.02.01 Medical electrical equipment – Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers - Edition 2.0 Active
IEC 60601-2-41 2009.08.01 Medical electrical equipment – Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis - Edition 2.0 Active
IEC 60601-2-44 2009.02.01 Medical electrical equipment – Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography - Edition 3.0 Active
IEC 60601-2-50 2009.03.01 Medical electrical equipment – Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment - Edition 2.0 Active
IEC 60601-2-54 2009.06.01 Medical electrical equipment – Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy - Edition 1.0 Active
IEC 60603-7-1 2009.06.01 "Connectors for electronic equipment – Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors - Edition 2.0" Active
IEC 60617 SNAPSHOT 2009.02.01 Graphical symbols for diagrams - DATABASE SNAPSHOT: 02/06/2009 Active
IEC 60626-1 2009.08.01 Combined flexible materials for electrical insulation – Part 1: Definitions and general requirements - Edition 3.0 Active
IEC 60626-2 2009.09.01 Combined flexible materials for electrical insulation – Part 2: Methods of test - Edition 3.0 Active
IEC 60630 AMD 6 2009.05.01 AMENDMENT 6 Maximum lamp outlines for incandescent lamps - Edition 2.0 Active
IEC 60633 2009.07.01 Terminology for high-voltage direct current (HVDC) transmission - Edition 2.1; Consolidated Reprint Active
IEC 60644 2009.08.01 Specification for high-voltage fuse-links for motor circuit applications - Edition 2.0 Active
IEC 60645-6 2009.04.01 Electroacoustics – Audiometric equipment – Part 6: Instruments for the measurement of otoacoustic emissions - Edition 1.0 Active
IEC 60645-7 2009.04.01 Electroacoustics – Audiometric equipment – Part 7: Instruments for the measurement of auditory brainstem responses - Edition 1.0 Active
IEC 60669-2-1 2009.01.01 Switches for household and similar fixed electrical installations – Part 2-1: Particular requirements – Electronic switches - Edition 4.1; Consolidated Reprint Active
IEC 60695-1-10 2009.11.01 Fire hazard testing – Part 1-10: Guidance for assessing the fire hazard of electrotechnical products – General guidelines - Edition 1.0 Active
IEC 60704-2-2 2009.07.01 Household and similar electrical appliances – Test code for the determination of airborne acoustical noise – Part 2-2: Particular requirements for fan heaters - Edition 2.0 Active
IEC 60728-1-2 2009.06.01 "Cable networks for television signals, sound signals and interactive services – Part 1-2: Performance requirements for signals delivered at the system outlet in operation - Edition 1.0" Active
IEC 60728-7-3 2009.10.01 "Cable networks for television signals, sound signals and interactive services – Part 7-3: Hybrid fibre coax outside plant status monitoring – Power supply to transponder interface bus (PSTIB) - Edition 2.0" Active
IEC 60730-2-5 2009.02.01 Automatic electrical controls for household and similar use – Part 2-5: Particular requirements for automatic electrical burner control systems - Edition 3.2; Consolidated Reprint Active
IEC 60738-1 2009.07.01 Thermistors – Directly heated positive temperature coefficient – Part 1: Generic specification - Edition 3.1; Consolidated Reprint Active
IEC 60745-2-13 AMD 1 2009.07.01 AMENDMENT 1 Hand-held motor-operated electric tools – Safety – Part 2-13: Particular requirements for chain saws - Edition 2.0 Active
IEC 60745-2-15 2009.06.01 Hand-held motor-operated electric tools – Safety – Part 2-15: Particular requirements for hedge trimmers - Edition 2.1; Consolidated Reprint Active
IEC 60747-5-2 2009.11.01 Discrete semiconductor devices and integrated circuits – Part 5-2: Optoelectronic devices – Essential ratings and characteristics - Edition 1.1; Consolidated Reprint Active
IEC 60747-5-3 2009.11.01 Discrete semiconductor devices and integrated circuits – Part 5-3: Optoelectronic devices – Measuring methods - Edition 1.1; Consolidated Reprint Active
IEC 60747-14-3 2009.04.01 Semiconductor devices – Part 14-3: Semiconductor sensors – Pressure sensors - Edition 2.0 Active
IEC 60747-16-3 AMD 1 2009.03.01 AMENDMENT 1 Semiconductor devices – Part 16-3: Microwave integrated circuits – Frequency converters - Edition 1.0 Active
IEC 60747-16-4 AMD 1 2009.03.01 AMENDMENT 1 Semiconductor devices – Part 16-4: Microwave integrated circuits – Switches - Edition 1.0 Active
IEC 60749-20-1 2009.04.01 "Semiconductor devices – Mechanical and climatic test methods – Part 20-1: Handling, packing, labelling and shipping of surface-mount devices sensitive to the combined effect of moisture and soldering heat - Edition 1.0" Active
IEC 60768 2009.04.01 Nuclear power plants – Instrumentation important to safety – Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions - Edition 2.0 Active
IEC 60789 CORR 1 2009.10.01 Medical electrical equipment – Characteristics and test conditions of radionuclide imaging devices – Anger type gamma cameras - Edition 3.0 Active
IEC 60793-1-47 2009.03.01 Optical fibres – Part 1-47: Measurement methods and test procedures – Macrobending loss - Edition 3.0 Active
IEC 60793-2-40 2009.04.01 Optical fibres – Part 2-40: Product specifications – Sectional specification for category A4 multimode fibres - Edition 3.0 Active
IEC 60794-3-10 2009.01.01 "Optical fibre cables – Part 3-10: Outdoor cables – Family specification for duct, directly buried and lashed aerial optical telecommunication cables - Edition 2.0" Active
IEC 60794-3-20 2009.01.01 Optical fibre cables – Part 3-20: Outdoor cables – Family specification for self-supporting aerial telecommunication cables - Edition 2.0 Active
IEC 60800 CORR 1 2009.08.01 CORRIGENDUM 1 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation - Edition 3.0 Active
IEC 60800 2009.07.01 Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation - Edition 3.0 Active
IEC 60809 AMD 4 2009.02.01 "AMENDMENT 4 Lamps for road vehicles – Dimensional, electrical and luminous requirements - Edition 2.0" Active
IEC 60819-1 2009.09.01 Non-cellulosic papers for electrical purposes – Part 1: Definitions and general requirements - Edition 3.0 Active
IEC 60825-4 2009.10.01 Safety of laser products – Part 4: Laser guards - Edition 2.1; Consolidated Reprint Active
IEC 60846-1 2009.04.01 "Radiation protection instrumentation – Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation – Part 1: Portable workplace and environmental meters and monitors - Edition 1.0" Active
IEC 60851-1 AMD 2 2009.11.01 AMENDMENT 2 Winding wires − Test methods − Part 1: General - Edition 2.0 Active
IEC 60851-2 2009.09.01 Winding wires – Test methods – Part 2: Determination of dimensions - Edition 3.0 Active
IEC 60851-3 2009.01.01 Winding wires – Test methods – Part 3: Mechanical properties - Edition 3.0 Active
IEC 60855-1 2009.10.01 Live working – Insulating foam-filled tubes and solid rods – Part 1: Tubes and rods of a circular cross-section - Edition 1.0 Active
IEC 60893-3-5 2009.10.01 Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-5: Specifications for individual materials – Requirements for rigid laminated sheets based on polyester resins - Edition 2.1; Consolidated Reprint Active
IEC 60893-3-6 2009.11.01 Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-6: Specifications for individual materials – Requirements for rigid laminated sheets based on silicone resins - Edition 2.1; Consolidated Reprint Active
IEC 60893-3-7 2009.11.01 Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-7: Specifications for individual materials – Requirements for rigid laminated sheets based on polyimide resins - Edition 2.1; Consolidated Reprint Active
IEC 60904-4 2009.06.01 Photovoltaic devices – Part 4: Reference solar devices – Procedures for establishing calibration traceability - Edition 1.0 Active
IEC 60906-1 2009.04.01 IEC system of plugs and socket-outlets for household and similar purposes – Part 1: Plugs and socket-outlets 16 A 250 V a.c. - Edition 2.0 Active
IEC 60909-3 2009.03.01 Short-circuit currents in three-phase AC systems – Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth - Edition 3.0 Active
IEC 60917-1 2009.11.01 Modular order for the development of mechanical structures for electronic equipment practices – Part 1: Generic standard - Edition 1.1; Consolidated Reprint Active
IEC 60947-2 2009.05.01 Low-voltage switchgear and controlgear – Part 2: Circuit-breakers - Edition 4.1; Consolidated Reprint Active
IEC 60947-4-1 2009.09.01 Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters - Edition 3.0 Active
IEC 60947-5-1 2009.07.01 Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices - Edition 3.1; Consolidated Reprint Active
IEC 60947-7-1 2009.04.01 Low-voltage switchgear and controlgear – Part 7-1: Ancillary equipment – Terminal blocks for copper conductors - Edition 3.0 Active
IEC 60947-7-2 2009.04.01 Low-voltage switchgear and controlgear – Part 7-2: Ancillary equipment – Protective conductor terminal blocks for copper conductors - Edition 3.0 Active
IEC 60947-7-3 2009.04.01 Low-voltage switchgear and controlgear – Part 7-3: Ancillary equipment – Safety requirements for fuse terminal blocks - Edition 2.0 Active
IEC 60951-1 2009.06.01 Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions – Part 1: General requirements - Edition 2.0 Active
IEC 60951-2 2009.06.01 Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions – Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air - Edition 2.0 Active
IEC 60951-3 2009.06.01 Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions – Part 3: Equipment for continuous high range area gamma monitoring - Edition 2.0 Active
IEC 60951-4 2009.06.01 Nuclear power plants – Instrumentation important to safety – Radiation monitoring for accident and post-accident conditions – Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams - Edition 2.0 Active
IEC 60958-3 AMD 1 2009.10.01 AMENDMENT 1 Digital audio interface – Part 3: Consumer applications - Edition 3.0 Active
IEC 60964 2009.02.01 Nuclear power plants – Control rooms – Design - Edition 2.0 Active
IEC 60965 2009.07.01 Nuclear power plants – Control rooms – Supplementary control points for reactor shutdown without access to the main control room - Edition 2.0 Active
IEC 60966-2-3 2009.01.01 "Radio frequency and coaxial cable assemblies – Part 2-3: Detail specification for flexible coaxial cable assemblies – Frequency range 0 MHz to 1 000 MHz, IEC 61169-8 connectors - Edition 3.0" Active
IEC 60966-2-4 2009.01.01 "Radio frequency and coaxial cable assemblies – Part 2-4: Detail specification for cable assemblies for radio and TV receivers – Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors - Edition 3.0" Active
IEC 60966-2-5 2009.01.01 "Radio frequency and coaxial cable assemblies – Part 2-5: Detail specification for cable assemblies for radio and TV receivers – Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors - Edition 3.0" Active
IEC 60966-2-6 2009.01.01 "Radio frequency and coaxial cable assemblies – Part 2-6: Detail specification for cable assemblies for radio and TV receivers – Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors - Edition 3.0" Active
IEC 60966-3-1 2009.01.01 Radio frequency and coaxial cable assemblies – Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies - Edition 3.0 Active
IEC 60974-8 2009.02.01 Arc welding equipment – Part 8: Gas consoles for welding and plasma cutting systems - Edition 2.0 Active
IEC 60988 2009.08.01 "Nuclear power plants – Instrumentation important to safety – Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures - Edition 2.0" Active
IEC 61000-3-2 CORR 1 2009.08.01 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current Less than or equal to 16 A per phase) - Edition 3.2 Active
IEC 61000-3-2 2009.04.01 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current Less than or equal to 16 A per phase) - Edition 3.2; Consolidated Reprint Active
IEC 61000-4-5 CORR 2009.10.01 Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement techniques – Surge immunity test - Edition 2.0 Active
IEC 61000-4-7 2009.10.01 "Electromagnetic compatibility (EMC) – Part 4-7: Testing and measurement techniques – General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto - Edition 2.1; Consolidated Reprint" Active
IEC 61000-4-8 2009.09.01 Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test - Edition 2.0 Active
IEC 61000-4-13 2009.07.01 "Electromagnetic compatibility (EMC) – Part 4-13: Testing and measurement techniques – Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests - Edition 1.1; Consolidated Reprint" Active
IEC 61000-4-14 2009.08.01 Electromagnetic compatibility (EMC) – Part 4-14: Testing and measurement techniques – Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase - Edition 1.2; Consolidated Reprint Active
IEC 61000-4-16 AMD 2 2009.07.01 "AMENDMENT 2 Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz - Edition 1.1" Active
IEC 61000-4-17 2009.01.01 Electromagnetic compatibility (EMC) – Part 4-17: Testing and measurement techniques – Ripple on d.c. input power port immunity test - Edition 1.2; Consolidated Reprint Active
IEC 61000-4-27 2009.04.01 "Electromagnetic compatibility (EMC) – Part 4-27: Testing and measurement techniques – Unbalance, immunity test for equipment with input current not exceeding 16 A per phase - Edition 1.1; Consolidated Reprint" Active
IEC 61000-4-28 2009.04.01 "Electromagnetic compatibility (EMC) – Part 4-28: Testing and measurement techniques – Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase - Edition 1.2; Consolidated Reprint" Active
IEC 61000-4-34 2009.11.01 "Electromagnetic compatibility (EMC) – Part 4-34: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase - Edition 1.1; Consolidated Reprint" Active
IEC 61003-2 2009.08.01 Industrial-process control systems – Instruments with analogue inputs and two or multi-state outputs – Part 2: Guidance for inspection and routine testing - Edition 1.0 Active
IEC 61010-2-081 2009.08.01 "Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes - Edition 1.1; Consolidated Reprint" Active
IEC 61020-1 2009.07.01 Electromechanical switches for use in electrical and electronic equipment – Part 1: Generic specification - Edition 2.0 Active
IEC 61051-2 AMD 1 2009.05.01 AMENDMENT 1 Varistors for use in electronic equipment – Part 2: Sectional specification for surge suppression varistors - Edition 1.0 Active
IEC 61058-1 CORR 1 2009.01.01 Switches for appliances – Part 1: General requirements CORRIGENDUM 1 - Edition 3.0 Active
IEC 61073-1 2009.01.01 Fibre optic interconnecting devices and passive components – Mechanical splices and fusion splice protectors for optical fibres and cables – Part 1: Generic specification - Edition 4.0 Active
IEC 61076-3-114 2009.04.01 Connectors for electronic equipment – Product requirements – Part 3-114: Rectangular connectors – Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface – Variant 11 related to IEC 61076-3-106 – Bayonet coupling type - Edition 1.0 Active
IEC 61076-3-115 2009.06.01 Connectors for electronic equipment – Product requirements – Part 3-115: Rectangular connectors – Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface – Variant 12 related to IEC 61076-3-106 – Push-pull type - Edition 1.0 Active
IEC 61076-3-117 2009.04.01 Connectors for electronic equipment – Product requirements – Part 3-117: Rectangular connectors – Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface – Variant 14 related to IEC 61076-3-106 – Push-pull coupling - Edition 1.0 Active
IEC 61094-2 2009.02.01 Electroacoustics – Measurement microphones – Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique - Edition 2.0 Active
IEC 61095 2009.02.01 Electromechanical contactors for household and similar purposes - Edition 2.0 Active
IEC 61111 2009.04.01 Live working – Electrical insulating matting - Edition 2.0 Active
IEC 61112 2009.04.01 Live working – Electrical insulating blankets - Edition 2.0 Active
IEC 61140 2009.09.01 Protection against electric shock – Common aspects for installation and equipment - Edition 3.1; Consolidated Reprint Active
IEC 61156-1 2009.10.01 "French, English" Multicore and symmetrical pair/quad cables for digital communications – Part 1: Generic specification - Edition 3.1; Consolidated Reprint Active
IEC 61156-3-1 2009.05.01 Multicore and symmetrical pair/quad cables for digital communications – Part 3-1: Work area wiring – Blank detail specification - Edition 3.0 Active
IEC 61156-4 2009.05.01 Multicore and symmetrical pair/quad cables for digital communications – Part 4: Riser cables – Sectional specification - Edition 3.0 Active
IEC 61156-4-1 2009.05.01 Multicore and symmetrical pair/quad cables for digital communications – Part 4-1: Riser cables – Blank detail specification - Edition 3.0 Active
IEC 61156-5-1 2009.10.01 Multicore and symmetrical pair/quad cables for digital communications – Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz – Horizontal floor wiring – Blank detail specification - Edition 3.0 Active
IEC 61156-5 CORR 1 2009.05.01 CORRIGENDUM 1 Multicore and symmetrical pair/quad cables for digital communications – Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz-horizontal floor wiring – Sectional specification - Edition 2.0 Active
IEC 61156-5 2009.02.01 Multicore and symmetrical pair/quad cables for digital communications – Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz-horizontal floor wiring – Sectional specification - Edition 2.0 Active
IEC 61156-6-1 2009.10.01 Multicore and symmetrical pair/quad cables for digital communications – Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz – Work area wiring – Blank detail specification - Edition 3.0 Active
IEC 61156-8 CORR 1 2009.07.01 Multicore and symmetrical pair/quad cables for digital communications – Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz – Work area wiring – Sectional specification - Edition 1.0 Active
IEC 61156-8 2009.05.01 Multicore and symmetrical pair/quad cables for digital communications – Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz – Work area wiring – Sectional specification - Edition 1.0 Active
IEC 61169-24 2009.02.01 "Radio-frequency connectors – Part 24: Sectional specification – Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) - Edition 2.0" Active
IEC 61169-39 2009.06.01 Radio-frequency connectors – Part 39: Sectional specification for CQM series quick lock RF connectors - Edition 1.0 Active
IEC 61184 CORR 1 2009.02.01 CORRIGENDUM 1 Bayonet Lampholders - Edition 3.0 Active
IEC 61188-7 CORR 1 2009.07.01 Printed boards and printed board assemblies – Design and use – Part 7: Electronic component zero orientation for CAD library construction - Edition 1.0 Active
IEC 61188-7 2009.05.01 Printed boards and printed board assemblies – Design and use – Part 7: Electronic component zero orientation for CAD library construction - Edition 1.0 Active
Buy IEC 61196-1-113 2009.08.01 Coaxial communication cables – Part 1-113: Electrical test methods – Test for attenuation constant - Edition 1.0 Active
IEC 61196-1-201 2009.02.01 Coaxial communication cables – Part 1-201: Environmental test methods – Test for cold bend performance of cable - Edition 1.0 Active
IEC 61196-1-208 2009.02.01 Coaxial communication cables – Part 1-208: Environmental test methods – Longitudinal pneumatic resistance - Edition 1.0 Active
IEC 61196-1-313 2009.02.01 Coaxial communication cables – Part 1-313: Mechanical test methods – Adhesion of dielectric and sheath - Edition 1.0 Active
IEC 61196-6 2009.01.01 Coaxial communication cables – Part 6: Sectional specification for CATV drop cables - Edition 1.0 Active
IEC 61196-6-1 2009.01.01 Coaxial communication cables – Part 6-1: Blank detail specification for CATV drop cables - Edition 1.0 Active
IEC 61202-1 2009.06.01 Fibre optic interconnecting devices and passive components – Fibre optic isolators – Part 1: Generic specification - Edition 3.0 Active
IEC 61226 2009.07.01 Nuclear power plants – Instrumentation and control important to safety – Classification of instrumentation and control functions - Edition 3.0 Active
IEC 61243-1 2009.06.01 Live working – Voltage detectors – Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. - Edition 2.1; Consolidated Reprint Active
IEC 61243-3 2009.11.01 Live working – Voltage detectors – Part 3: Two-pole low-voltage type - Edition 2.0 Active
IEC 61249-2-31 2009.02.01 "Materials for printed boards and other interconnecting structures – Part 2-31: Reinforced base materials, clad and unclad – Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad - Edition 1.0" Active
IEC 61249-2-32 2009.02.01 "Materials for printed boards and other interconnecting structures – Part 2-32: Reinforced base materials, clad and unclad – Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad - Edition 1.0" Active
IEC 61249-2-33 2009.02.01 "Materials for printed boards and other interconnecting structures – Part 2-33: Reinforced base materials, clad and unclad – Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad - Edition 1.0" Active
IEC 61249-2-34 2009.02.01 "Materials for printed boards and other interconnecting structures – Part 2-34: Reinforced base materials, clad and unclad – Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad - Edition 1.0" Active
IEC 61249-4-14 2009.05.01 "Materials for printed boards and other interconnecting structures – Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) – Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly - Edition 1.0" Active
IEC 61249-4-15 2009.05.01 "Materials for printed boards and other interconnecting structures – Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) – Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly - Edition 1.0" Active
IEC 61249-4-16 2009.05.01 "Materials for printed boards and other interconnecting structures – Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) – Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly - Edition 1.0" Active
IEC 61249-4-17 2009.05.01 "Materials for printed boards and other interconnecting structures – Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) – Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly - Edition 1.0" Active
IEC 61280-1-4 2009.11.01 Fibre optic communication subsystem test procedures – Part 1-4: General communication subsystems – Light source encircled flux measurement method - Edition 2.0 Active
IEC 61280-2-3 2009.07.01 Fibre optic communication subsystem test procedures – Part 2-3: Digital systems – Jitter and wander measurements - Edition 1.0 Active
IEC 61280-2-9 2009.02.01 Fibre optic communication subsystem test procedures – Part 2-9: Digital systems – Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems - Edition 2.0 Active
IEC 61280-4-1 2009.06.01 Fibre-optic communication subsystem test procedures – Part 4-1: Installed cable plant – Multimode attenuation measurement - Edition 2.0 Active
IEC 61290-10-1 2009.03.01 Optical amplifiers – Test methods – Part 10-1: Multichannel parameters – Pulse method using an optical switch and optical spectrum analyzer - Edition 2.0 Active
IEC 61300-2-1 2009.08.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-1: Tests – Vibration (sinusoidal) - Edition 3.0 Active
IEC 61300-2-2 2009.01.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-2: Tests – Mating durability - Edition 3.0 Active
IEC 61300-2-12 2009.07.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-12: Tests – Impact - Edition 3.0 Active
IEC 61300-2-34 2009.05.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-34: Tests – Resistance to solvents and contaminating fluids of interconnecting components and closures - Edition 2.0 Active
IEC 61300-2-48 2009.03.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-48: Tests – Temperature-humidity cycling - Edition 2.0 Active
IEC 61300-3-2 2009.01.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-2: Examination and measurements – Polarization dependent loss in a single-mode fibre optic device - Edition 3.0 Active
IEC 61300-3-3 2009.03.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of changes in attenuation and return loss - Edition 3.0 Active
IEC 61300-3-7 2009.01.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-7: Examinations and measurements – Wavelength dependence of attenuation and return loss of single mode components - Edition 2.0 Active
IEC 61300-3-34 2009.01.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-34: Examinations and measurements – Attenuation of random mated connectors - Edition 3.0 Active
IEC 61300-3-35 2009.11.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-35: Examinations and measurements – Fibre optic connector endface visual and automated inspection - Edition 1.0 Active
IEC 61300-3-43 2009.01.01 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-43: Examinations and measurements – Mode transfer function measurement for fibre optic sources - Edition 1.0 Active
IEC 61314-1 2009.01.01 Fibre optic interconnecting devices and passive components – Fibre optic fan-outs – Part 1: Generic specification - Edition 3.0 Active
IEC 61347-2-9 2009.10.01 Lamp controlgear – Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) - Edition 1.2; Consolidated Reprint Active
IEC 61347-2-10 2009.01.01 Lamp controlgear – Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) - Edition 1.1; Consolidated Reprint Active
IEC 61360-1 2009.07.01 Standard data elements types with associated classification scheme for electric items – Part 1: Definitions – Principles and methods - Edition 3.0 Active
IEC 61400-3 2009.02.01 Wind turbines – Part 3: Design requirements for offshore wind turbines - Edition 1.0 Active
IEC 61439-1 2009.01.01 Low-voltage switchgear and controlgear assemblies – Part 1: General rules - Edition 1.0 Active
IEC 61439-2 2009.01.01 Low-voltage switchgear and controlgear assemblies – Part 2: Power switchgear and controlgear assemblies - Edition 1.0 Active
IEC 61477 CORR 1 2009.04.01 "CORRIGENDUM 1 Live working – Minimum requirements for the utilization of tools, devices and equipment - Edition 2.0" Active
IEC 61477 2009.02.01 "Live working – Minimum requirements for the utilization of tools, devices and equipment - Edition 2.0" Active
IEC 61482-1-1 2009.05.01 Live working – Protective clothing against the thermal hazards of an electric arc – Part 1-1: Test methods – Method 1: Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing - Edition 1.0 Active
IEC 61482-2 2009.04.01 Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements - Edition 1.0 Active
IEC 61500 2009.10.01 Nuclear power plants – Instrumentation and control important to safety – Data communication in systems performing category A functions - Edition 2.0 Active
IEC 61512-4 2009.10.01 Batch control – Part 4: Batch production records - Edition 1.0 Active
IEC 61534-22 2009.01.01 Powertrack systems – Part 22: Particular requirements for powertrack systems intended for on floor or under floor installation - Edition 1.0 Active
IEC 61535 2009.02.01 Installation couplers intended for permanent connection in fixed installations - Edition 1.0 Active
IEC 61547 2009.06.01 Equipment for general lighting purposes – EMC immunity requirements - Edition 2.0 Active
IEC 61557-9 2009.01.01 "Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 9: Equipment for insulation fault location in IT systems - Edition 2.0" Active
IEC 61557-11 2009.01.01 "Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems - Edition 1.0" Active
IEC 61558-1 2009.04.01 "Safety of power transformers, power supplies, reactors and similar products – Part 1: General requirements and tests - Edition 2.1; Consolidated Reprint" Active
IEC 61558-2-4 2009.02.01 "Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers - Edition 2.0" Active
IEC 61558-2-6 2009.02.01 "Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers - Edition 2.0" Active
IEC 61558-2-13 2009.02.01 "Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers - Edition 2.0" Active
IEC 61558-2-16 2009.06.01 "Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units - Edition 1.0" Active
IEC 61559-1 2009.05.01 Radiation protection instrumentation in nuclear facilities – Centralized systems for continuous monitoring of radiation and/or levels of radioactivity – Part 1: General requirements - Edition 1.0 Active
IEC 61577-4 2009.02.01 Radiation protection instrumentation – Radon and radon decay product measuring instruments – Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) - Edition 1.0 Active
IEC 61588 2009.02.01 Precision clock synchronization protocol for networked measurement and control systems - Edition 2.0 Active
IEC 61606-1 2009.07.01 Audio and audiovisual equipment – Digital audio parts – Basic measurement methods of audio characteristics – Part 1: General - Edition 2.0 Active
IEC 61606-2 2009.07.01 Audio and audiovisual equipment – Digital audio parts – Basic measurement methods of audio characteristics – Part 2: Consumer use - Edition 2.0 Active
IEC 61643-21 2009.04.01 Low voltage surge protective devices – Part 21: Surge protective devices connected to telecommunications and signalling networks – Performance requirements and testing methods - Edition 1.1; Consolidated Reprint Active
IEC 61676 2009.01.01 Medical electrical equipment – Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology - Edition 1.1; Consolidated Reprint Active
IEC 61747-5-3 2009.04.01 "Liquid crystal display devices – Part 5-3: Environmental, endurance and mechanical test methods – Glass strength and reliability - Edition 1.0" Active
IEC 61753-031-3 2009.02.01 Fibre optic interconnecting devices and passive components performance standard – Part 031-3: Non-connectorized single-mode 1×N and 2×N non-wavelengthselective branching devices (NWBD) for Category U – Uncontrolled environment - Edition 1.0 Active
IEC 61753-081-2 2009.08.01 Fibre optic interconnecting devices and passive components performance standard – Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 × N DWDM devices for category C – Controlled environments - Edition 1.0 Active
IEC 61753-086-2 2009.09.01 Fibre optic interconnecting devices and passive components performance standard – Part 086-2: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category C – Controlled environment - Edition 1.0 Active
IEC 61753-111-7 2009.11.01 Fibre optic interconnecting devices and passive components performance standard – Part 111-7: Sealed closures for category A – Aerial - Edition 1.0 Active
IEC 61753-111-8 2009.11.01 Fibre optic interconnecting devices and passive components performance standard – Part 111-8: Sealed closures for category G – Ground - Edition 1.0 Active
IEC 61753-111-9 2009.10.01 Fibre optic interconnecting devices and passive components performance standard – Part 111-9: Sealed closures for category S – Subterranean - Edition 1.0 Active
IEC 61754-15 2009.06.01 Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 15: Type LSH connector family - Edition 2.0 Active
IEC 61754-24 2009.09.01 Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 24: Type SC-RJ connector family - Edition 1.0 Active
IEC 61754-24-11 2009.06.01 Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117 - Edition 1.0 Active
IEC 61754-24-21 2009.06.01 "Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 24-21: Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06 - Edition 1.0" Active
IEC 61755-3-1 CORR 1 2009.01.01 "CORRIGENDUM 1 Fibre optic connector optical interfaces – Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule single mode fibre - Edition 1.0" Active
IEC 61755-3-2 CORR 1 2009.01.01 "CORRIGENDUM 1 Fibre optic connector optical interfaces – Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres - Edition 1.0" Active
IEC 61755-3-7 2009.01.01 "Fibre optic interconnecting devices and passive components – Fibre optic connector optical interfaces – Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre - Edition 1.0" Active
IEC 61755-3-8 2009.01.01 "Fibre optic interconnecting devices and passive components – Fibre optic connector optical interfaces – Part 3-8: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre - Edition 1.0" Active
IEC 61772 2009.04.01 Nuclear power plants – Control rooms – Application of visual display units (VDUs) - Edition 2.0 Active
IEC 61784-5-3 CORR 1 2009.02.01 CORRIGENDUM 1 INDUSTRIAL COMMUNICATION NETWORKS – PROFILES Part 5-3: Installation of fieldbuses – Installation profiles for CPF 3 - Edition 1.0 Active
IEC 61822 2009.05.01 Electrical installations for lighting and beaconing of aerodromes – Constant current regulators - Edition 2.0 Active
IEC 61850-7-420 2009.03.01 Communication networks and systems for power utility automation – Part 7-420: Basic communication structure – Distributed energy resources logical nodes - Edition 1.0 Active
IEC 61857-21 2009.05.01 Electrical insulation systems – Procedures for thermal evaluation – Part 21: Specific requirements for general-purpose models – Wire-wound applications - Edition 3.0 Active
IEC 61914 2009.01.01 Cable cleats for electrical installations - Edition 1.0 Active
IEC 61918 CORR 1 2009.02.01 CORRIGENDUM 1 INDUSTRIAL COMMUNICATION NETWORKS – Installation of communication networks in industrial premises - Edition 1.0 Active
IEC 61935-1 2009.07.01 Specification for the testing of balanced and coaxial information technology cabling – Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards - Edition 3.0 Active
IEC 61968-9 2009.09.01 Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management - Edition 1.0 Active
IEC 61970-301 2009.04.01 Energy management system application program interface (EMS-API) – Part 301: Common information model (CIM) base - Edition 2.0 Active
IEC 61978-1 2009.11.01 Fibre optic interconnecting devices and passive components – Fibre optic passive chromatic dispersion compensators – Part 1: Generic specification - Edition 2.0 Active
IEC 61987-10 2009.07.01 Industrial-process measurement and control – Data structures and elements in process equipment catalogues – Part 10: Lists of properties (LOPs) for industrial-process measurement and control for electronic data exchange – Fundamentals - Edition 1.0 Active
IEC 61988-2-3 2009.07.01 Plasma display panels – Part 2-3: Measuring methods – Image quality: defects and degradation - Edition 1.0 Active
IEC 61988-3-2 2009.08.01 Plasma display panels – Part 3-2: Interface – Electrical interface - Edition 1.0 Active
IEC 61988-5 2009.11.01 Plasma display panels – Part 5: Generic specification - Edition 1.0 Active
IEC 61995-2 2009.02.01 Devices for the connection of luminaires for household and similar purposes – Part 2: Standard sheets for DCL - Edition 1.0 Active
IEC 62003 2009.03.01 Nuclear power plants – Instrumentation and control important to safety – Requirements for electromagnetic compatibility testing - Edition 1.0 Active
IEC 62007-2 2009.01.01 Semiconductor optoelectronic devices for fibre optic system applications – Part 2: Measuring methods - Edition 2.0 Active
IEC 62047-6 2009.04.01 Semiconductor devices – Micro-electromechanical devices – Part 6: Axial fatigue testing methods of thin film materials - Edition 1.0 Active
IEC 62074-1 2009.07.01 Fibre optic interconnecting devices and passive components – Fibre optic WDM devices – Part 1: Generic specification - Edition 1.0 Active
IEC 62080 2009.01.01 Sound signalling devices for household and similar purposes - Edition 1.1; Consolidated Reprint Active
IEC 62083 2009.09.01 Medical electrical equipment – Requirements for the safety of radiotherapy treatment planning systems - Edition 2.0 Active
IEC 62097 2009.02.01 "Hydraulic machines, radial and axial – Performance conversion method from model to prototype - Edition 1.0" Active
IEC 62106 2009.07.01 "Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz - Edition 2.0" Active
IEC 62110 2009.08.01 Electric and magnetic field levels generated by AC power systems – Measurement procedures with regard to public exposure - Edition 1.0 Active
IEC 62134-1 2009.06.01 Fibre optic interconnecting devices and passive components – Fibre optic closures – Part 1: Generic specification - Edition 2.0 Active
IEC 62137-1-4 2009.01.01 Surface mounting technology – Environmental and endurance test methods for surface mount solder joint – Part 1-4: Cyclic bending test - Edition 1.0 Active
IEC 62137-1-5 2009.02.01 Surface mounting technology – Environmental and endurance test methods for surface mount solder joints – Part 1-5: Mechanical shear fatigue test - Edition 1.0 Active
IEC 62148-11 2009.06.01 Fibre optic active components and devices – Package and interface standards – Part 11: 14-pin active device modules - Edition 2.0 Active
IEC 62148-16 2009.08.01 Fiber optic active components and devices – Package and interface standards – Part 16: Transmitter and receiver components for use with the LC connector interface - Edition 1.0 Active
IEC 62149-2 2009.07.01 Fibre optic active components and devices – Performance standards – Part 2: 850 nm discrete vertical cavity surface emitting laser devices - Edition 1.0 Active
IEC 62150-4 2009.11.01 Fibre optic active components and devices – Test and measurement procedures – Part 4: Relative intensity noise using a time-domain optical detection system - Edition 1.0 Active
IEC 62153-4-10 2009.05.01 Metallic communication cable test methods – Part 4-10: Electromagnetic compatibility (EMC) – Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial method - Edition 1.0 Active
Buy IEC 62153-4-11 2009.08.01 "Metallic communication cable test methods – Part 4-11: Electromagnetic compatibility (EMC) – Coupling attenuation or screening attenuation of patch cords, coaxial cable assemblies, pre-connectorized cables – Absorbing clamp method - Edition 1.0" Active
IEC 62153-4-12 2009.08.01 Metallic communication cable test methods – Part 4-12: Electromagnetic compatibility (EMC) – Coupling attenuation or screening attenuation of connecting hardware – Absorbing clamp method - Edition 1.0 Active
IEC 62153-4-13 2009.08.01 Metallic communication cable test methods – Part 4-13: Electromagnetic compatibility (EMC) – Coupling attenuation of links and channels (laboratory conditions) – Absorbing clamp method - Edition 1.0 Active
IEC 62192 2009.02.01 Live working – Insulating ropes - Edition 1.0 Active
IEC 62216 2009.05.01 Digital terrestrial television receivers for the DVB-T system - Edition 1.0 Active
IEC 62223 2009.06.01 Insulators – Glossary of terms and definitions - Edition 1.0 Active
IEC 62258-1 2009.04.01 Semiconductor die products – Part 1: Procurement and use - Edition 2.0 Active
IEC 62267 2009.07.01 Railway applications – Automated urban guided transport (AUGT) – Safety requirements - Edition 1.0 Active
IEC 62271-104 2009.04.01 High-voltage switchgear and controlgear – Part 104: Alternating current switches for rated voltages of 52 kV and above - Edition 1.0 Active
IEC 62271-110 2009.01.01 High-voltage switchgear and controlgear – Part 110: Inductive load switching - Edition 2.0 Active
IEC 62282-6-300 2009.06.01 Fuel cell technologies – Part 6-300: Micro fuel cell power systems – Fuel cartridge interchangeability - Edition 1.0 Active
IEC 62313 2009.04.01 Railway applications – Power supply and rolling stock – Technical criteria for the coordination between power supply (substation) and rolling stock - Edition 1.0 Active
IEC 62319-1 CORR 1 2009.03.01 Polymeric thermistors – Directly heated positive step function temperature coefficient – Part 1: Generic specification CORRIGENDUM 1 - Edition 1.0 Active
IEC 62320-1 2009.05.01 "Maritime navigation and radiocommunication equipment and systems – Automatic identification system (AIS) – Part 1: AIS Base Stations – Minimum operational and performance requirements, methods of testing and required test results - Edition 1.1; Consolidated Reprint" Active
IEC 62341-1-1 2009.04.01 Organic light emitting diode (OLED) displays – Part 1-1: Generic specifications - Edition 1.0 Active
IEC 62341-5 2009.11.01 Organic light emitting diode (OLED) displays – Part 5: Environmental testing methods - Edition 1.0 Active
IEC 62341-6-1 2009.05.01 Organic light emitting diode (OLED) displays – Part 6-1: Measuring methods of optical and electro-optical parameters - Edition 1.0 Active
IEC 62343-5-1 2009.06.01 Dynamic modules – Test methods – Part 5-1: Dynamic gain tilt equalizer – Response time measurement - Edition 1.0 Active
IEC 62365 2009.05.01 Digital audio – Digital input-output interfacing – Transmission of digital audio over asynchronous transfer mode (ATM) networks - Edition 2.0 Active
IEC 62384 AMD 1 2009.07.01 AMENDMENT 1 DC or AC supplied electronic control gear for LED modules – Performance requirements - Edition 1.0 Active
IEC 62386-102 2009.06.01 Digital addressable lighting interface – Part 102: General requirements – Control gear - Edition 1.0 Active
IEC 62386-201 2009.06.01 Digital addressable lighting interface – Part 201: Particular requirements for control gear – Fluorescent lamps (device type 0) - Edition 1.0 Active
IEC 62386-202 2009.06.01 Digital addressable lighting interface – Part 202: Particular requirements for control gear – Self-contained emergency lighting (device type 1) - Edition 1.0 Active
IEC 62386-203 2009.06.01 Digital addressable lighting interface – Part 203: Particular requirements for control gear – Discharge lamps (excluding fluorescent lamps) (device type 2) - Edition 1.0 Active
IEC 62386-204 2009.06.01 Digital addressable lighting interface – Part 204: Particular requirements for control gear – Low voltage halogen lamps (device type 3) - Edition 1.0 Active
IEC 62386-205 2009.06.01 Digital addressable lighting interface – Part 205: Particular requirements for control gear – Supply voltage controller for incandescent lamps (device type 4) - Edition 1.0 Active
IEC 62386-206 2009.06.01 Digital addressable lighting interface – Part 206: Particular requirements for control gear – Conversion from digital signal into d. c. voltage (device type 5) - Edition 1.0 Active
IEC 62386-207 2009.08.01 Digital addressable lighting interface – Part 207: Particular requirements for control gear – LED modules (device type 6) - Edition 1.0 Active
IEC 62386-208 2009.06.01 Digital addressable lighting interface – Part 208: Particular requirements for control gear – Switching function (device type 7) - Edition 1.0 Active
IEC 62423 2009.11.01 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses - Edition 2.0 Active
IEC 62430 2009.02.01 Environmentally conscious design for electrical and electronic products - Edition 1.0 Active
IEC 62446 2009.05.01 "Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection - Edition 1.0" Active
IEC 62448 2009.02.01 Multimedia systems and equipment – Multimedia e-publishing and e-books – Generic format for E-publishing - Edition 2.0 Active
IEC 62453-1 2009.06.01 Field device tool (FDT) interface specification – Part 1: Overview and guidance - Edition 1.0 Active
IEC 62453-2 2009.06.01 Field device tool (FDT) interface specification – Part 2: Concepts and detailed description - Edition 1.0 Active
IEC 62453-301 2009.06.01 Field device tool (FDT) interface specification – Part 301: Communication profile integration – IEC 61784 CPF 1 - Edition 1.0 Active
IEC 62453-302 2009.06.01 Field device tool (FDT) interface specification – Part 302: Communication profile integration – IEC 61784 CPF 2 - Edition 1.0 Active
IEC 62453-303-1 2009.06.01 Field device tool (FDT) interface specification – Part 303-1: Communication profile integration – IEC 61784 CP 3/1 and CP 3/2 - Edition 1.0 Active
IEC 62453-303-2 2009.06.01 "Field device tool (FDT) interface specification – Part 303-2: Communication profile integration – IEC 61784 CP 3/4, CP 3/5 and CP 3/6 - Edition 1.0" Active
IEC 62453-306 2009.06.01 Field device tool (FDT) interface specification – Part 306: Communication profile integration – IEC 61784 CPF 6 - Edition 1.0 Active
IEC 62453-309 2009.07.01 Field device tool (FDT) interface specification – Part 309: Communication profile integration – IEC 61784 CPF 9 - Edition 1.0 Active
IEC 62453-315 2009.07.01 Field device tool (FDT) interface specification – Part 315: Communication profile integration – IEC 61784 CPF 15 - Edition 1.0 Active
IEC 62467-1 2009.06.01 Medical electrical equipment – Dosimetric instruments as used in brachytherapy – Part 1: Instruments based on well-type ionization chambers - Edition 1.0 Active
IEC 62496-3-1 2009.08.01 Optical circuit boards – Part 3-1: Performance standards – Flexible optical circuit boards using unconnectorized optical glass fibres - Edition 1.0 Active
IEC 62501 2009.06.01 Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission – Electrical testing - Edition 1.0 Active
IEC 62505-1 2009.03.01 Railway applications – Fixed installations – Particular requirements for a.c. switchgear – Part 1: Single-phase circuit-breakers with Un above 1 kV - Edition 1.0 Active
IEC 62505-2 2009.03.01 "Railway applications – Fixed installations – Particular requirements for a.c. switchgear – Part 2: Single-phase disconnectors, earthing switches and switches with Un above 1 kV - Edition 1.0" Active
IEC 62505-3-1 2009.03.01 "Railway applications – Fixed installations – Particular requirements for a.c. switchgear – Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems – Application guide - Edition 1.0" Active
IEC 62505-3-2 2009.03.01 "Railway applications – Fixed installations – Particular requirements for a.c. switchgear – Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems – Single-phase current transformers - Edition 1.0" Active
IEC 62505-3-3 2009.03.01 "Railway applications – Fixed installations – Particular requirements for a.c. switchgear – Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems – Single-phase inductive voltage transformers - Edition 1.0" Active
IEC 62516-1 2009.02.01 Terrestrial digital multimedia broadcasting (T-DMB) receivers – Part 1: Basic requirement - Edition 1.0 Active
IEC 62524 2009.02.01 Multimedia systems and equipment – Multimedia e-publishing and e-books – Reader’s format for e-publishing - Edition 1.0 Active
IEC 62546 2009.07.01 High Definition (HD) recording link guidelines - Edition 1.0 Active
Buy IEC 62576 2009.08.01 Electric double-layer capacitors for use in hybrid electric vehicles – Test methods for electrical characteristics - Edition 1.0 Active
IEC 62577 2009.08.01 Evaluation of human exposure to electromagnetic fields from a stand-alone broadcast transmitter (30 MHz – 40 GHz) - Edition 1.0 Active
IEC 62624 2009.08.01 Test methods for measurement of electrical properties of carbon nanotubes - Edition 1.0 Active
IEC 80601-2-30 2009.01.01 Medical electrical equipment – Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers - Edition 1.0 Active
IEC 80601-2-35 2009.10.01 "Medical electrical equipment – Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use - Edition 2.0" Active
IEC 80601-2-59 CORR 1 2009.04.01 "French, English" CORRIGENDUM 1 Medical electrical equipment – Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening - Edition 1.0 Active
IEC 81346-1 2009.07.01 "Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations – Part 1: Basic rules - Edition 1.0" Active
IEC 81346-2 2009.07.01 "Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations – Part 2: Classification of objects and codes for classes - Edition 1.0" Active
IEC CISPR 11 2009.05.01 "Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement - Edition 5.0" Active
IEC CISPR 12 2009.03.01 "Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers - Edition 6.1; Consolidated Reprint" Active
IEC CISPR 13 2009.06.01 Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement - Edition 5.0 Active
IEC CISPR 14-1 2009.02.01 "Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission - Edition 5.1; Consolidated Reprint" Active
IEC CISPR 15 2009.01.01 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment - Edition 7.2; Consolidated Reprint Active
IEC CISPR 16-1-2 CORR 1 2009.01.01 CORRIGENDUM 1 Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-2: Radio disturbance and immunity measuring apparatus – Ancillary equipment – Conducted disturbances - Edition 1.0 Active
IEC CISPR 22 INT 1 2009.10.01 Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement - Edition 6.0 Active
IEC CISPR 25 CORR 1 2009.01.01 "Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of on-board receivers CORRIGENDUM 1 - Edition 3.0" Active
IEC CISPR/TR 16-4-1 2009.02.01 "Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties, statistics and limit modelling – Uncertainties in standardized EMC tests - Edition 2.0" Active
IEC GUIDE 107 2009.02.01 Electromagnetic compatibility – Guide to the drafting of electromagnetic compatibility publications - Edition 3.0 Active
IEC IECEX 05 2009.10.01 IECEx Scheme for Certification of Personnel Competencies for Explosive Atmospheres – Rules of Procedure - Edition 1.0 Active
IEC PAS 60092-510 2009.04.01 Electrical installations in ships – Part 510: Special features – High-voltage shore connection systems - Edition 1.0 Active
IEC PAS 61076-2-108 2009.06.01 Connectors for electronic equipment – Product requirements – Part 2-108: Circular connectors – Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101 - Edition 1.0 Active
IEC PAS 61158-3-22 2009.08.01 Industrial communication networks – Fieldbus specifications – Part 3-22: Data-link layer service definition – Type SNpTYPE elements - Edition 1.0 Active
IEC PAS 61158-4-22 2009.08.01 Industrial communication networks – Fieldbus specifications – Part 4–22: Data-link layer protocol specification – Type SNpTYPE elements - Edition 1.0 Active
Buy IEC PAS 61158-5-22 2009.08.01 Industrial communication networks – Fieldbus specifications – Part 5-22: Application layer service definition – Type SNpTYPE elements - Edition 1.0 Active
IEC PAS 61158-6-22 2009.08.01 Industrial communication networks – Fieldbus specifications – Part 6-22: Application layer protocol specification – Type SNpTYPE elements - Edition 1.0 Active
IEC PAS 61169-18 2009.03.01 Radio-frequency connectors – Part 18: Sectional specification – Radio frequency coaxial connectors of type SSMA - Edition 1.0 Active
IEC PAS 61169-19 2009.03.01 Radio-frequency connectors – Part 19: Sectional specification for SSMB series R.F. coaxial connectors - Edition 1.0 Active
IEC PAS 61169-35 2009.03.01 "Radio-frequency connectors – Part 35: Sectional specification – Radio frequency coaxial connectors of type 2,92 - Edition 1.0" Active
IEC PAS 61169-41 2009.04.01 Radio-frequency connectors – Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors - Edition 1.0 Active
IEC PAS 61169-42 2009.04.01 Radio-frequency connectors – Part 42: Sectional specification for CQN series quick lock RF coaxial connectors - Edition 1.0 Active
IEC PAS 61753-1-3 2009.11.01 Fibre optic interconnecting devices and passive components performance standard – Part 1-3: General and guidance for performance standards – Single-mode fibre optic connector performance for harsh industrial operating conditions - Edition 1.0 Active
Buy IEC PAS 61784-3-18 2009.08.01 Industrial communication networks – Profiles – Part 3-18: Functional safety fieldbuses – Additional specifications for CPF SNpFAMILY - Edition 1.0 Active
IEC PAS 62591 2009.01.01 Industrial communication networks – Fieldbus specifications – WirelessHART communication network and communication profile - Edition 1.0 Active
IEC PAS 62596 2009.01.01 Electrotechnical products – Determination of restricted substances – Sampling procedure – Guidelines - Edition 1.0 Active
IEC PAS 62601 2009.01.01 Industrial communication networks – Fieldbus specifications – WIA-PA communication network and communication profile - Edition 1.0 Active
IEC PAS 62611 2009.07.01 Vacuum cleaners for commercial use – Methods for measuring performance - Edition 1.0 Active
IEC PAS 62612 2009.06.01 Self-ballasted LED-lamps for general lighting services – Performance requirements - Edition 1.0 Active
IEC PAS 62614 2009.03.01 Fibre optics - Launch condition requirements for measuring multimode attenuation - Edition 1.0 Active
IEC PAS 62633 2009.08.01 Industrial communication networks – Profiles – Additional Fieldbus profiles for real-time networks based on ISO/IEC 8802-3 – SNpTYPE - Edition 1.0 Active
IEC TR 60083 2009.02.01 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC - Edition 6.0 Active
IEC TR 60092-370 2009.07.01 Electrical installations in ships – Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables - Edition 1.0 Active
IEC TR 60919-3 2009.10.01 Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 3: Dynamic conditions - Edition 2.0 Active
IEC TR 60943 2009.03.01 "Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals - Edition 2.1; Consolidated Reprint" Active
IEC TR 61000-4-35 2009.07.01 Electromagnetic compatibility (EMC) – Part 4-35: Testing and measurement techniques – HPEM simulator compendium - Edition 1.0 Active
IEC TR 61156-1-2 2009.05.01 Multicore and symmetrical pair/quad cables for digital communications – Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables - Edition 1.0 Active
IEC TR 61292-1 2009.04.01 Optical amplifiers – Part 1: Parameters of amplifier components - Edition 2.0 Active
IEC TR 61340-5-2 CORR 1 2009.05.01 CORRIGENDUM 1 Part 5-2: Protection of electronic devices from electrostatic phenomena – User guide - Edition 1.0 Active
IEC TR 61912-2 2009.05.01 Low-voltage switchgear and controlgear – Over-current protective devices – Part 2: Selectivity under over-current conditions - Edition 1.0 Active
IEC TR 61916 2009.11.01 Electrical accessories – Harmonization of general rules - Edition 2.0 Active
IEC TR 62001 2009.10.01 High-voltage direct current (HVDC) systems – Guidebook to the specification and design evaluation of A.C. filters - Edition 1.0 Active
IEC TR 62002-4 2009.04.01 Mobile and portable DVB-T/H radio access – Part 4: Measurement methods for total radiated sensitivity in hand-held broadcast terminals - Edition 1.0 Active
IEC TR 62096 2009.03.01 Nuclear power plants – Instrumentation and control important to safety – Guidance for the decision on modernization - Edition 2.0 Active
IEC TR 62271-208 2009.10.01 "High-voltage switchgear and controlgear – Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations - Edition 1.0" Active
IEC TR 62271-301 2009.09.01 High-voltage switchgear and controlgear – Part 301: Dimensional standardisation of high-voltage terminals - Edition 2.0 Active
IEC TR 62271-305 2009.11.01 High-voltage switchgear and controlgear – Part 305: Capacitive current switching capability of air-insulated disconnectors for rated voltages above 52 kV - Edition 1.0 Active
IEC TR 62291 2009.02.01 Multimedia data storage – Application program interface for UDF based file systems - Edition 2.0 Active
IEC TR 62296 2009.01.01 Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements - Edition 2.0 Active
IEC TR 62343-6-2 2009.07.01 Dynamic modules – Part 6-2: Software and hardware interfaces – Survey results - Edition 1.0 Active
IEC TR 62354 2009.10.01 General testing procedures for medical electrical equipment - Edition 2.0 Active
IEC TR 62443-3-1 2009.07.01 Industrial communication networks – Network and system security – Part 3-1: Security technologies for industrial automation and control systems - Edition 1.0 Active
IEC TR 62453-41 2009.08.01 Field device tool (FDT) interface specification – Part 41: Object model integration profile – Common object model - Edition 1.0 Active
IEC TR 62453-61 2009.08.01 Field device tool (FDT) interface specification – Part 61: Device Type Manager (DTM) Styleguide for common object model - Edition 1.0 Active
IEC TR 62453-501 2009.08.01 Field device tool (FDT) interface specification – Part 501: Communication implementation for common object model – IEC 61784 CPF 1 - Edition 1.0 Active
IEC TR 62453-502 2009.08.01 Field device tool (FDT) interface specification – Part 502: Communication implementation for common object model – IEC 61784 CPF 2 - Edition 1.0 Active
IEC TR 62453-503-1 2009.08.01 Field device tool (FDT) interface specification – Part 503-1: Communication implementation for common object model – IEC 61784 CP 3/1 and CP 3/2 - Edition 1.0 Active
IEC TR 62453-503-2 2009.08.01 "Field device tool (FDT) interface specification – Part 503-2: Communication implementation for common object model – IEC 61784 CP 3/4, CP 3/5 and CP 3/6 - Edition 1.0" Active
IEC TR 62453-506 2009.08.01 Field device tool (FDT) interface specification – Part 506: Communication implementation for common object model – IEC 61784 CPF 6 - Edition 1.0 Active
IEC TR 62453-509 2009.08.01 Field device tool (FDT) interface specification – Part 509: Communication implementation for common object model – IEC 61784 CPF 9 - Edition 1.0 Active
IEC TR 62453-515 2009.08.01 Field device tool (FDT) interface specification – Part 515: Communication implementation for common object model – IEC 61784 CPF 15 - Edition 1.0 Active
IEC TR 62471-2 2009.08.01 Photobiological safety of lamps and lamp systems – Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety - Edition 1.0 Active
IEC TR 62517 2009.04.01 Magnetizing behaviour of permanent magnets - Edition 1.0 Active
IEC TR 62518 2009.03.01 Rare earth sintered magnets – Stability of the magnetic properties at elevated temperatures - Edition 1.0 Active
IEC TR 62540 2009.11.01 Radio frequency identification (RFID) of stationary lead acid cells and monoblocs – Tentative requirements - Edition 1.0 Active
IEC TR 62547 2009.03.01 Guidelines for the measurement of high-power damage sensitivity of singlemode fibres to bends – Guidance for the interpretation of results - Edition 1.0 Active
IEC TR 62602 2009.09.01 Conductors of insulated cables – Data for AWG and KCMIL sizes - Edition 1.0 Active
IEC TR 80002-1 2009.09.01 Medical device software – Part 1: Guidance on the application of ISO 14971 to medical device software - Edition 1.0 Active
IEC TS 60034-24 2009.09.01 Rotating electrical machines – Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents – Application guide - Edition 1.0 Active
IEC TS 60076-14 2009.05.01 Power transformers – Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials - Edition 2.0 Active
IEC TS 61000-3-5 CORR 1 2009.09.01 Electromagnetic compatibility (EMC) – Part 3-5: Limits – Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A - Edition 2.0 Active
IEC TS 61000-3-5 2009.07.01 Electromagnetic compatibility (EMC) – Part 3-5: Limits – Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A - Edition 2.0 Active
IEC TS 61000-5-8 2009.08.01 Electromagnetic compatibility (EMC) – Part 5-8: Installation and mitigation guidelines – HEMP protection methods for the distributed infrastructure - Edition 1.0 Active
IEC TS 61000-5-9 2009.07.01 Electromagnetic compatibility (EMC) – Part 5-9: Installation and mitigation guidelines – System-level susceptibility assessments for HEMP and HPEM - Edition 1.0 Active
Buy IEC TS 62351-5 2009.08.01 Power systems management and associated information exchange – Data and communications security – Part 5: Security for IEC 60870-5 and derivatives - Edition 1.0 Active
IEC TS 62443-1-1 2009.07.01 "Industrial communication networks – Network and system security – Part 1-1: Terminology, concepts and models - Edition 1.0" Active
IEC TS 62564-1 2009.05.01 Aerospace qualified electronic component (AQEC) – Part 1: Microcircuits - Edition 1.0 Active
IEC TS 62578 2009.11.01 Power electronics systems and equipment – Operation conditions and characteristics of active infeed converter applications - Edition 1.0 Active
IEC TS 62592 2009.09.01 Encoding guidelines for portable multimedia CE products using MP4 file format with AVC video codec and AAC audio codec - Edition 1.0 Active
IEC TS 62610-1 2009.09.01 Mechanical structures for electronic equipment – Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series – Part 1: Design guide: Interface dimension and provision for thermo electrical cooling systems (Peltier effect) - Edition 1.0 Active
No comments:
Post a Comment